Ebyte E07-900MM10S CC1101 1.5km 855-925MHz Rf Modül
172,00 TL + KDV
Kategori
Stok Kodu
T63
Fiyat
172,00 TL + KDV
KDV Dahil Fiyat
206,40 TL
| RF parameters | unit | parameters | Remark |
| Maximum transmit power | dBm | 9～11 | - |
| Receiver sensitivity |
dBm | -105～-106 | The air rate is 1.2kbps |
| Reference | M | 1500m | It is clear and open, theantenna gain is 5dBi, the antenna height is 2.5 meters, and the air rate is 1.2kbps。 |
| Working frequency | MHz | 855～925 | Supports ISM bands |
| air speed | bps | 0.6k～500k | User Programmable Control |
| blocking power | dBm | 10 | Less chance of burning when used at close range |
| Electrical parameters | unit | parameters |
Remark |
| Operating Voltage | V | 2.5～3.6 | ≥3.3V can guarantee the output power,more than 3.8V will burn the module permanently |
| communication level | V | 3.3 | Using 5V TTL has the risk of burning |
| emission current |
mA | 32 | Instantaneous power consumption |
| receive current |
mA | 18 | - |
| Operating temperature |
℃ | -20～+85 | industrial grade |
| Storage temperature |
℃ | -40～+125 | - |
| hardware parameters |
parameters | Remark |
| chip | CC1101 | - |
| Crystal frequency |
26MHz | 10ppm |
| Modulation | GFSK(recommended) | Support OOK, ASK, GFSK, 2-FSK, 4-FSK and MSK |
| Interface | stamp hole | Pitch 1.27mm |
| Communication Interface |
SPI | 0～10Mbps |
| FIFO | 64Byte | The maximum length of a single send |
| Encapsulation | patch | - |
| Antenna interface |
stamp hole | The characteristic impedance is about 50 ohms |
| size | 10*10mm | ±0.1mm |
| Product Weight | 0.5g | ±0.05g |
| pin numbe | pin name | Pin direction | Pin usage |
| 1 | VCC | input | power supply |
| 2 | GND | - | power supply |
| 3 | NC | - | - |
| 4 | NC | - | - |
| 5 | NC | - | - |
| 6 | ANT | input/output | Antenna interface, stamp hole (50 ohm characteristic impedance) |
| 7 | GND | - | power supply |
| 8 | NC | - | - |
| 9 | NC | - | - |
| 10 | NC | - | - |
| 11 | NC | - | - |
| 12 | MISO/GD01 | output | SPI data output |
| 13 | MOSI | input | SPI data input |
| 14 | CSN | input | Module chip select pin, used to start an SPI communication |
| 15 | SCK | input | SPI clock input |
| 16 | GND | - | power supply |
| 17 | NC | - | - |
| 18 | GD00 | input/output | CC1101 chip pins, see the chip official user manual for details |
| 19 | NC | - | - |
| 20 | GD02 | input/output | CC1101 chip pins, see the chip official user manual for details |
Bu ürüne ilk yorumu siz yapın!